20
English
Clock/Timer
Clock setting
There are two possible methods for setting the
clock: manually or automatically by using RDS.
Automatic clock setting
Refer to “Setting the RDS clock”.
Manual clock setting
The clock can be set in either 12-hour or
24-hour mode ("
AM 12
:
00
" or "
00
:
00
" for
example).
1
In standby mode, press and hold
CLOCK/RDS
on the remote control.
➜
SET CLOCK
is displayed briefly. Then, the
clock digits for the hours flash.
2
Press
Ç
on the remote control to select clock
mode.
➜
"
12 TO 24 HOUR
" or "
24 TO 12 HOUR
"
scrolls once. Then, the clock digits for the hours
continue to flash.
3
Adjust
VOLUME -/+
(or press
VOL +/-
on the
remote control) to set the hours.
4
Press
CLOCK/RDS
again.
➜
The clock digits for the minutes flash.
5
Adjust
VOLUME -/+
(or press
VOL +/-
on the
remote control) to set the minutes.
6
Press
CLOCK/RDS
to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the CD, FM or USB is switched on at a
set time (one time operation). The clock time
needs to be set first before the timer can be
used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press
TIMER/SLEEP
on the
remote control for more than two seconds.
2
Press
SOURCE
repeatedly to select the sound
source.
➜
“
SET TIME
” and “
SELECT SOURCE
” are
displayed.
3
Press
TIMER/SLEEP
to confirm your desired
mode.
➜
“
SET ON TIME
” is displayed
and the clock
digits for the hours flash.
4
Adjust
VOLUME -/+
(or press
VOL +/-
on the
remote control) to set the hours.
5
Press
TIMER/SLEEP
again.
➜
The clock digits for the minutes flash.
6
Adjust
VOLUME -/+
(or press
VOL +/-
on the
remote control) to set the minutes.
7
Press
TIMER/SLEEP
to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press
TIMER/
SLEEP
once
on the remote control.
➜
Display shows
if activated, and disappears if
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1
Press
TIMER/SLEEP
on the remote control
repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
60
60
60
60
60
™
45
45
45
45
45
™
30
30
30
30
30
™
15
15
15
15
15
™
0
00
00
™
60
60
60
60
60
…
➜
"
SLEEP XX
" is displayed. "
XX
" is the time in
minutes.
➜
is displayed if the sleep time you have
selected is not 0.
2
When you reach the desired length of time, stop
pressing the
TIMER/SLEEP
button.
To deactivate the sleep timer
●
Press
TIMER/SLEEP
repeatedly until "
0
" is
displayed, or press
Eco Power/STANDBY-IN
2
.
pg 001-025_MCM398D_22-Eng
2007.5.18, 10:34
20
Содержание MCM398D Series
Страница 3: ...3 1 3 0 2 9 7 6 8 iPod 3 9 8 D ...
