11
3
Release the socket
fl
ap.
Connect FM antenna
Tip
For optimal reception, fully extend and adjust
•
the position of the antenna.
For better FM stereo reception, connect an
•
outdoor FM antenna to the
FM AERIAL
jack.
The unit does not support MW radio
•
reception.
1
Connect the supplied FM antenna to the
FM AERIAL
jack on the main unit.
Connect power
Caution
Risk of product damage! Ensure that the
•
power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
Risk of electric shock! When you unplug the
•
AC power cord, always pull the plug from the
socket. Never pull the cord.
Before you connect the AC power cord,
•
ensure that you have completed all other
connections.
a
b
c
3 Get started
Caution
Use the controls only as stated in this user
•
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for
the model and serial number of your unit. The
model number and serial number are on the
bottom of your unit. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
Ensure that the colors of the speaker wires
•
and terminals are matched.
For optimal sound, use the supplied speakers
•
only.
Connect only speakers with impedance that is
•
the same or higher than the supplied speakers.
Refer to the Speci
fi
cations section of this
manual.
1
Hold down the socket
fl
ap.
2
Insert the stripped part of the wire
completely.
Insert the right speaker wires to “
•
R
”,
left speaker wires to “
L
”.
Insert the red wires to “
•
+
”, black
wires to “
-
”.
English
EN
EN.indd Sec1:11
EN.indd Sec1:11
2009-3-16 17:15:42
2009-3-16 17:15:42
