14
Program radio stations
manually
1
In tuner mode, tune to a radio station.
2
Press
PROG
to activate programming
mode.
3
Press / to select a number from 1–20
for this radio station, and then press
PROG
to confirm.
4
The preset number and the frequency of
the preset station are displayed.
5
Repeat steps 2-3 to program other
stations.
6
Press and hold / for 3 seconds to
search for the nearest station.
Note
To overwrite a programmed station, store
•
another station in its place.
Select a preset radio station
In tuner mode, press / to select a preset
number.
You can also press the numeric buttons
•
to select a preset number directly.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1
Tune to an RDS station.
2
Press
RDS
repeatedly to scroll through
the following information (if available):
Station name
»
Program type such as
»
[NEWS]
(news),
[SPORT]
(sport),
[POP M]
(pop
music)...
RDS RT
»
Frequency
»
5 Listen to the
radio
Tune to a radio station
Note
Position the antenna as far as possible from
•
TV, VCR, or other radiation source.
Ensure that you have connected and fully
•
extended the supplied FM antenna.
1
Press
SOURCE
repeatedly to select FM.
2
Press and hold / (
/
) for more
than 2 seconds.
[
»
SEARCH
] (search) is displayed.
The radio tunes to a station with
»
strong reception automatically.
3
Repeat step 3 to tune to more stations.
To tune to a weak station:
Press / (
/
) repeatedly until you find
optimal reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset
•
radio stations (FM).
In tuner mode, press and hold
PROG
for 3
seconds to activate automatic programming.
»
[AUTO SCAN]
(auto scan) is
displayed.
All available stations are programmed
»
in the order of waveband reception
strength.
The first programmed radio station is
»
broadcast automatically.
EN
