10
English
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Plug and Play
(for tuner installlation)
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "
AUTO
INSTALL
-
PRESS PLAY
" is displayed.
2
Press
ÉÅ
on the system to star t installation.
➜
"
PLUG AND PLAY
" .... "
INSTALL
" is
displayed, followed by "TUNER" and "AUTO".
➜
PROG
starts flashing.
➜
The system will automatically store the radio
stations with sufficient signal strength, starting
from FM, and followed by MW band.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the first preset radio station will be played.
To reinstall Plug and Play
1
In standby mode, press and hold
ÉÅ
on the
system until "
AUTO INSTALL
-
PRESS PLAY
"
is displayed.
2
Press
ÉÅ
again to start installation.
➜
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
●
Press
9
on the system.
➜
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– If no stereo frequency is detected during Plug
and Play, "CHECK ANTENNA" will be displayed.
– During Plug and Play, if no button is pressed
within 15 seconds, the system will exit Plug and
Play mode.
Switching the system on
●
Press
STANDBY-ON
2
or
SOURCE
(
POWER
,
DISC
,
TUN
, or
AUX
on the
remote control).
➜
The system will switch to the last selected
source.
●
Press
DISC
,
TUN
, or
AUX
on the remote
control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press
STANDBY-ON
2
on the system (or
POWER
on the remote control).
Power-saving automatic standby
The power-saving feature automatically switches
to standby 90 minutes after a CD playback has
ended and no control is operated.
Adjusting volume and sound
1
Press
VOL
+
/
-
to adjust volume.
➜
Display shows the volume level
VOL
and a
number from 0-32.
2
Press
DSC
repeatedly to select the desired
sound effect:
JAZZ
/
POP
/
CLASSIC
/
ROCK
.
3
Press
DBB
to switch bass enhancement on or
off.
➜
Display shows:
if the DBB is activated.
4
Press
MUTE
on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press
MUTE
again;
– adjust the volume controls;
– change source.
M I C R O S Y S T E M M C M 1 4 8
SOURC E
DBB
STANDBY-ON
VOL
VOL
TUNING
PROG
PRESET
iR
A L B U M /
MODE
MP3-CD/CD-R/CD-RW COMPATIBLE
ALB/
PRESET
pg001-pg020_MCM148_77_Eng
2010.3.30, 18:01
10
