11
English
EN
Connect speakers
Note
&
For optimal sound, use the supplied speakers only.
&
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
<
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
Connect power
Caution
&
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the rear of the main unit.
&
Before connecting the AC cord, make sure that you
have completed all other connections.
Note
&
The type plate is located on the rear of the main unit.
1
Connect the power cord to the
AC~
jack
on the main unit.
2
Connect the power plug to the wall outlet.
R +
–
–
L +
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
»
[AUTO INSTALL - PRESS PLAY-
STOP CANCEL]
(press
to start
automatic installation, or press to
cancel) is displayed.
2
Press
on the main unit to start
installation.
»
The unit automatically stores radio
# @ @ <
»
When all the available radio stations
%
is broadcast automatically.
Set clock
Note
&
You can set the clock in standby mode only.
1
Press to switch the unit to standby.
2
Make sure that --:-- (or clock) is displayed.
3
Press and hold
CLOCK SET
to activate
the clock setting mode.
»
[CLOCK SET]
(clock set) is displayed.
»
The 12 hour or 24 hour format is
displayed.
4
Press / or
VOL -/+
to select 12 hour
or 24 hour format.
5
Press
CLOCK SET
.
»
The hour digits begin to blink.
6
Press / or
VOL -/+
to set the hour.
7
Press
CLOCK SET
.
»
The minute digits begin to blink.
8
Press / or
VOL -/+
to set the minute.
9
Press
CLOCK SET
<
