Philips MCD706, Руководство пользователя

Страница: 32 / 41

32
English
Radio Reception
Tuning to radio stations
1
Press STANDBY-ON
B
(
B
on the remote)
to switch on the last selected source.
2
Press
SOURCE
(
TUNER
on the remote) to
select TUNER mode.
3
Press
TUNER
on the remote again to select
the desired band: FM or MW.
4
Press and hold
¡
/
™
(or
2
/
3
on the remote
control) until the frequency indication starts to
change, then release.
➜
The system automatically tunes to the next
strong radio station.
●
To tune to a weak station, press
¡
/
™
(or
2
/
3
on the remote control) briefly and repeatedly
until an optimal reception is found.
5
Repeat Step 4 if necessary until you find the
desired radio station.
Presetting radio stations
You can preset up to 40 stations (20 in each
band) regardless of the reception.
Automatic progamming
●
Press
PROGRAM
on the remote for more
than two seconds to activate programming.
➜
All available stations are programmed.
Manual progamming
1
Tune to your desired radio station (refer to
“Tuning to radio stations”).
2
Press
PROGRAM
on the remote.
➜
”
PROG
” icon flashes.
Other Functions
3
Press PRESET + or PRESET-/
9
(or
¡
/
™
on
the remote) to select the desired preset number.
➜
If “
PROG
” icon goes off before you select the
desired preset number, press PROGRAM on
the remote.
4
Press PROGRAM on the remote again to
store the radio station.
●
Repeat steps 1-4 to store other radio stations.
Listening to preset radio stations
●
In tuner mode, press PRESET + or PRESET-/
9
(or
¡
/
™
on the remote) to select the
desired preset number.
➜
The preset number, radio frequency, and
waveband are displayed.
Setting the clock
1
In Standby mode, press and hold CLOCK/RDS
on the remote until the time flashes on the
display.
➜
”
CLOCK SET
” is displayed briefly. Then, the
hour digits flash on the display screen.
2
Turn VOLUME -/+ clockwise or anticlockwise
or press
VOL +/-
on the remote to set the
hours.
3
Press
CLOCK/RDS
to confirm.
➜
The minute digits flash on the display screen.
4
Turn VOLUME -/+ clockwise or anticlockwise
or press VOL +/- on the remote to set the
minutes.
5
Press
CLOCK/RDS
again to confirm the clock
setting.
Notes:
– This system only supports 24-hour mode.
– The clock setting will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 30 seconds.
pg 001-040_MCD706_98_Eng 2007.6.22, 16:33 32