18
EN
8 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC, FM, or USB as the alarm source.
Note
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold
TIMER/
SLEEP
for more than two seconds.
»
"TIMER SET" (timer set) scrolls on the
display panel. Then, "SELECT SOURCE"
is displayed.
2
Select a source (disc, USB, or tuner).
»
The hour digits are displayed and begin
to blink.
3
Press / (or
VOL -
/
VOL +
) repeatedly
to set the hour, and then press
TIMER/
SLEEP
.
»
The minute digits are displayed and
begin to blink.
4
Repeat step 3 to set the minute, and adjust
volume.
Note
•
If no button is pressed in 90 seconds, the unit exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
•
In standby mode, press
TIMER/SLEEP
repeatedly to activate or deactivate the
alarm.
»
If the timer is activated, is displayed.
Tip
•
If the disc/USB source is selected, but no disc is placed
or no USB connected, the unit switches to the tuner
source automatically.
Set the sleep timer
•
To set the sleep timer, when the unit
is switched on, press
TIMER/SLEEP
repeatedly to select a set period of time
(in minutes).
»
When the sleep timer is activated,
is displayed.
To deactivate sleep timer:
•
When the unit is switched on, press
TIMER/SLEEP
repeatedly until
[SLP OFF]
(sleep off) is displayed.
»
When the sleep timer is deactivated,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an 3.5mm audio cable (not supplied).
1
Make sure that the external audio device
is connected to this unit (see 'Connect an
external audio device' on page 10).
2
Press
AUX
to select the
AUX IN
source.
3
Start to play the external device (see the
user manual of the external device).
Содержание MCD5110
Страница 2: ......
