Philips MCD300, Руководство пользователя

Страница: 7 / 37

41
English
Connections
IMPORTANT!
– The type plate is located at the rear of
the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
– Never make or change any
connections with the power switched on.
Connecting the speakers
Connect the speakers to the SPEAKERS (8 Ω )
terminals with two speaker wires. Right speaker
to “R” and left speaker to “L”, red wire to “+”
and silver wire to “-”. Fully insert the stripped
portion of the speaker wire into the terminal as
shown.
Notes:
– Ensure that the speaker wires are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker jacks.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
1 2
AC power cord
Speaker
(right)
Speaker
(left)
AM/MW loop
antenna
FM wire antenna
TV
p038-p071_MCD300_Eng 2005.11.3, 16:34 41