11
English
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
●
Adjust the FM antenna for optimal FM stereo
reception.
Step 4: Connecting TV
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV
system.
– Connect the DVD system directly to
the TV.
Using Video In jack (CVBS)
1
Use the composite video cable (yellow) to
connect the system's
VIDEO
jack to the video
input jack (or labelled as A/V In, Video In,
Composite or Baseband) on the TV set.
2
To hear the sound of this DVD Player through
your TV, use the audio cables (white/red-not
supplied) to connect LINE OUT (L/R) jacks of
the DVD Player to the corresponding AUDIO
IN jacks on the TV.
Connections
Step 2: Connecting speakers
Connect the speaker wires to the
SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-". Fully inser t
the stripped portion of the speaker wire into
the terminal as shown.
Notes:
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to short-circuit.
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of +/- speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.
Step 3: Antenna connection
MW Antenna
Connect the supplied MW loop antenna to the
"
MW AERIAL
" terminal. Adjust the position of
the antenna for optimal reception.
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
pg001-pg036_MCD290_98-Eng
2005.11.14, 14:50
11
Содержание MCD290
Страница 1: ...MCD290 DVD MicroTheatre ...
Страница 3: ...3 1 2 7 9 8 0 5 4 3 6 DISPLAY ST 2 T H E A T H R E ...
Страница 4: ...4 1 2 7 0 ª 3 8 9 0 7 5 6 8 4 ...