24
Preference setup
On
[Preference Page]
, you can set the following
options:
[TV Type]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
•
[PAL]
- For TV with PAL color system.
•
[Auto]
- For TV that is compatible with
both PAL and NTSC.
•
[NTSC]
- For TV with NTSC color
system.
[Audio]
Select the preferred audio language for disc
play.
[Subtitle]
Select the preferred subtitle language for disc
play.
[Disc Menu]
Select the preferred disc menu language.
Note
If the language you have set is not available on
•
the disc, the disc uses its own default language.
For some discs, the subtitle/audio language can
•
only be changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
Press
OK
.
Select a rating level, then press
OK
.
Press the numeric keys to enter the
password.
[Night Mode]
Make loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
•
[On]
– enjoy quiet viewing at night
(DVDs only).
•
[Off]
– enjoy surround sound with its full
dynamic range.
Video setup
On
[Video Setup Page]
, you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is
used, this setting is not required.
•
[CVBS]
– If the S-Video connection is
used, select this option.
•
[Pr/Cr Pb/Cb Y]
– If the component
connection is used, select this option.
•
[RGB]
– If the SCART connection is used,
select this option.
[TV Mode]
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component]
to
[Pr/Cr Pb/Cb Y]
.
•
[Progressive]
– For progressive scan TV:
turn on the progressive scan mode.
•
[Interlace]
– For ordinary TV: turn on the
interlace mode.
[Picture Setting]
>
[Picture Setting Setup]
Customize picture color settings.
EN