18
English
Getting Started
9
Turn on your TV progressive scan mode (refer to
your TV user manual).
➜
The below menu appears on the TV.
0
Press
1
(
22
) /
2
(
33
) to highlight OK in the
menu and press
OK
to confirm.
➜
The setup is complete now and you can start
enjoy the high quality picture.
To deactivate Progressive manually
●
When the distorted sign still appears on
the TV
, it may be due to the connected TV
does not accept progressive signals, and
progressive is set by mistake. You must reset the
unit to interlace format.
1
Turn off your TV progressive scan mode or turn
on to interlaced mode (refer to your TV user
manual).
2
Press
SYSTEM
on the remote control to exit
the system menu. Then press
DISC
followed by
“1” to exit progressive scan.
➜
The DVD blue background screen will appear
on the TV.
Note:
– During normal playback in the progressive scan
mode, pressing DISC button and “1” will exit the
progressive scan mode.
1
Turn on your TV.
2
Turn off your TV progressive scan mode or turn
on interlaced mode (refer to your TV user
manual).
3
Press
STANDBY-ON
B
(
B
on the remote)
to turn on the DVD player.
4
Select the correct Video Input channel.
➜
The DVD background screen appears on the
TV.
5
Press
SYSTEM
.
6
Press
1
(
22
) /
2
(
33
) repeatedly to select
"
VIDEO SETUP PAGE
".
7
Select "
TV MODE
" to "
P-SCAN
", then
OK
to
confirm.
➜
The instruction menu appears on the TV.
8
Press
1
(
22
) /
2
(
33
) to highlight OK in the
menu and press
OK
to confirm.
There will be a distorted picture on your
TV at this state until you turn on the
progressive scan mode on your TV.
pg 001-020_MCD906_Eng-93
2010.3.29, 17:52
18
