16
English
3140 115 xxxxx
Radio Reception
Tuning to radio stations
1
Press
SOURCE
to select TUNER.
➜
TUNER
is displayed briefly.
2
Press
BAND
(or
TUNER
on the remote
control) once or more to select your waveband.
(FM/ AM)
3
Press and hold
TUNE
à
or
á
.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH
.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNE
à
or
á
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.
1
Press
PRESET
¡
or
™
to select the preset
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROGRAM
for more than 2 seconds to
activate programming.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press
PROGRAM
to activate programming.
➜
PROGRAM
flashes in the display.
3
Press
PRESET
¡
or
™
to allocate a number
from 1 to 40 to this station.
4
Press
PROGRAM
again to confirm the setting.
➜
PROGRAM
disappears, the preset number and
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press
PRESET
¡
or
™
until the desired preset
station is displayed.
