
16
English
MC138/17 English issue 1
Radio Reception
Tuning to radio stations
1
Select
TUNER
source.
➜
tU
is displayed briefly.
2
Press
SOURCE (TUNER
on the remote
control
)
once or more to select your waveband.
3
Press on
TUNE
à
or
á
and release button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning
Srch
.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNE
à
or
á
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 30 (20 FM and 10
AM) radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number 1. From this preset number
upwards, former programmed radio stations will
be overridden.
1
Press
SOURCE (TUNER
on the remote
control
)
once or more to select your waveband.
2
Press
¡
or
™
(on the remote control) to select
the preset number where programming should
start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
3
Press
PROGRAM
(
PROG
on the remote
control) for more than 2 seconds to activate
programming.
➜
AUto
is displayed and available stations are
programmed in order of waveband reception
strength.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press
PROGRAM
(
PROG
on the remote
control) to activate programming.
➜
PROGRAM
flashes in the display.
3
Press
¡
or
™
(on the remote control) to select
a number from 1 to 20 for FM (or 1 to 10 for
AM) to this station.
4
Press
PROGRAM
(
PROG
on the remote
control) again to confirm the setting.
➜
PROGRAM
disappears and the frequency of
the preset station is shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press
¡
or
™
(on the remote control) until the
desired preset station is displayed.