Philips MC-V320, Руководство пользователя

Страница: 22 / 27

22
English
MC-V320/21-1
Tape Operation/Recording
Tape playback
1
Select
TAPE
source.
2
Press to open the tape door on the top of the
system.
3
Insert a recorded tape and close the tape door.
●
Load the tape with the open side downward and
the full spool to the right.
➜
The display shows
TAPE
briefly. The tape
counter
0000
display with the
SIDE A
or
SIDE B
.
4
Press to start playback.
5
By pressing or , fast winding of tape is
possible in both directions.
●
During fast winding, you can monitor the tape
message with the tape counter.
6
To stop the tape, press STOP
9
.
●
To reset the tape counter, press STOP
9
again.
Note:
– The sound source cannot be changed while
recording a tape.
– “NO TAPE” will be shown if no tape inserted.
Switching tape sides
The tape side can be switched manually or
automatically before or during tape playback.
●
Press DISPLAY BAND on set only.
➜
The display shows
SIDE A
or
SIDE B
.
Reverse mode options
●
Press PROG/ REV repeatedly to select your
option;
PLAY 1 SIDE
: playback or record stops at
the end of the tape.
PLAY A AND B : both sides are or recorded
played once.
REPEAT A AND B : both sides are played
repeatedly, up to 5 times
each side.