Philips MC-M250, Руководство пользователя

Страница: 17 / 21

17
English
3140 115 29252
Tape Operation / Recording
Preparation for recording
1
Select
TAPE
source.
2
Load a recordable tape into tape deck with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc.
TUNER – tune to the desired radio station.
AUX – connect external equipment.
When recording is in progress
➜
REC
starts flashing.
●
To stop recording, press
9
.
●
It is not possible to listen to another source.
●
It is not possible to activate the timer function.
Synchro start CD recording
1
Select
CD
source.
●
Press
S
or
T
(
¡
or
™
) to select the
desired track to start recording.
●
You can programme the tracks in the order you
want them to be recorded (refer to “CD/MP3-
CD Operations - Programming the disc tracks”).
2
Press REC to start recording.
➜
Playing of the CD programme starts
automatically from the beginning of the CD
after 7 seconds. It is not necessary to start the
CD player separately.
One touch recording
1
Select
CD
,
TUNER
or
AUX
source.
2
If necessary, start playback of the selected
source.
3
Press
REC
to start recording.
Recording timer
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1
Select the preset radio station to record from
(refer to “Radio Reception - Tuning to preset
radio stations”).
2
In standby mode, press
TIMER SET
for more
than two seconds.
➜
flashes and a source is displayed.
3
Press SOURCE repeatedly until “REC TUN”
source is displayed.
4
Press
TIMER SET
to confirm the source.
➜
“
SET ON TIME SET ON TIME
SET ON TIME SET ON TIME
SET ON TIME
” is displayed, and the
clock digits for the hours flash.
5
Press VOLUME
+
/
-
to set the hours.
6
Press TIMER SET again.
➜
The clock digits for the minutes flash.
7
Press VOLUME
+
/
-
to set the minutes.
8
Press TIMER SET to confirm the recording
start time.
➜
“
SET OFF TIME SET OFF TIME SET OFF TIME SET OFF TIME SET OFF TIME
” is displayed, and the
clock digits for the hours flash.
9
Repeat steps 5-7 to set the finish time.
10
Press TIMER SET to confirm the timer settings.
➜
is shown and the recording timer is now
set.
Note:
– The recording timer will not be activated if the
system is in tape play mode.
pg 001-021/M250/22-Eng 4/17/02, 5:00 PM 17