15
English
3140 115 2xxx1
Tuner
TUNING
CLOCK
SIDE A/B
VOLUME
SHUFFLE
SOURCE
TIMER ON•OFF
PROGRAM
REPEAT
REV MODE/
BAND
STANDBY-ON
RECORD
M C - 3 0 M I C R O S Y S T E M
iR
FWD
á
/
ë
REW
à
/
í
PRESET
STOP
PLAY•PAUSE
Tuning to radio stations
1
Select
TUNER
source.
➜
TUNER
is displayed briefly.
2
Press
BAND
once or more to select your
waveband.
3
Press down on
TUNING
4
or
3
and release
button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning:
SEARCH
.
➜
If a FM station is received in stereo,
STEREO
is
shown.
4
Repeat step
3
if necessary until you find the
desired station.
¶
To tune to a weak station, press
TUNING
4
or
3
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only program
stations which are not in the memory already.
1
Press
PRESET
4
or
3
(
¡
or
™
on the
remote control) to select the preset number
where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROGRAM
on the system or remote
control for more than 2 seconds to activate
programming.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press
PROGRAM
on the system or remote
control to activate programming.
➜
PROGRAM
flashes in the display.
3
Press
PRESET
4
or
3
(
¡
or
™
on the remote
control) to allocate a number from 1 to 40 to
this station.
4
Press
PROGRAM
again to confirm the setting.
➜
PROGRAM
disappears, the preset number and
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
¶
You can override a preset station by storing
another frequency in its place.
Tuning to preset stations
¶
Press
PRESET
4
or
3
(
¡
or
™
on the
remote control) until the desired preset station
is displayed.
pg 001-021/MC30/37-Eng
12/8/00, 9:09 AM
15
