Philips MBD7020, Руководство пользователя, Страница: 35 / 42

35
7
Press SLEEP / TIMER to confirm.
The volume level indicator begins to
»
blink.
8
Press VOL +/- to set the volume level,
then press SLEEP / TIMER to confirm.
An alarm icon is displayed.
»
Note
In standby mode, press
•
SLEEP / TIMER repeatedly to
activate/deactivate the alarm timer.
When the alarm sounds, you can press
•
VOL +/- to
adjust volume.
If Disc/USB/Dock is selected as the alarm source,
•
while no disc is inserted or no USB/iPhone/iPod
connected, the system switches to the tuner source
instead.
Set the sleep timer
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
The unit turns off automatically after
»
the set period of time.
Update software
For software updates to enhance
performance, check the current software
version of this product to compare with the
latest software (if available) at the Philips
website.
1
Press .
2
Select [Setup] , and press OK .
3
Select [Advanced] > [Version Info.] , and
press OK .
9 Additional
Information
Adjust brightness of display
panel
1
In standby mode, press DIM repeatedly
to select different levels of brightness for
the display panel.
Turn on or off LED light
1
In power-on mode, press and hold DIM
to turn on or off the LED light at the
bottom of the unit and at the volume
knob.
Set alarm timer
Note
Make sure that you have set the clock correctly.
•
1
In standby mode, press and hold SLEEP
/ TIMER .
»
[TIMER SET] (set timer) appears
briefly. Then [SELECT SOURCE]
scrolls, followed by an alarm source
for selection.
2
Press VOL +/- to select an alarm source:
DISC , TUNER , USB DIRECT or DOCK .
3
Press SLEEP / TIMER to confirm.
The hour digits begin to blink.
»
4
Press VOL +/- to set the hour.
5
Press SLEEP / TIMER to confirm.
The minute digits begin to blink.
»
6
Press VOL +/- to set the minute.
EN