Deleting Functions From The L Keys:
1.
On the DSS remote control,press
and hold
SET
until the red light
blinks twice, then release
SET
.
2.
Enter
9 - 7 - 6
.
3.
Press the component
key once where the
learned feature to be
deleted is stored (e.g.,
TV
).
4.
Press the
L
key to be deleted
twice. The red light will blink
twice after the second press.
5.
To clear additional functions
stored on the
L
keys, repeat steps
1 through 4 .
SCAN Key
The
SCAN
key allows the remote control to
scan the TV, VCR, CBL and DSS channels.
When activated, the remote control will
change channels every 3 seconds.
1.
On the remote con-
trol, press
TV
,
VCR
,
CBL
, or
DSS
once.
2.
Press
SCAN
once. Scanning will
start with the current channel,
then proceed to the next channel
up, and continue until all chan-
nels of your TV,VCR, CBL or DSS
component are scanned.
3.
To stop scanning channels,press
SCAN
.
MCP Key
The DSS remote control includes a multi-
component power (
MCP
) key that can be
programmed for master power on/off con-
trol of components using a single key.
To program the MCP key:
1.
On the remote control, press and
hold
SET
until the red light blinks
twice, then release
SET
.
2.
Enter
9-9-5
. The red light will
blink twice.
3.
Press
MCP
once.
4.
Press a Component
key once (e.g.,
TV
,
VCR
,
CBL
,
AUD
,
DSS
,
or
CD
).
5.
Press
POWER
.
6.
Repeat steps 4 and 5 for each
component you want under
master power on/off control.
7.
Press and hold
SET
until the red
light blinks twice, then release
SET
.
To Clear The MCP Key:
1.
On the remote control,press and
hold
SET
until the red light
blinks twice, then release
SET
.
2.
Enter
9-9-5
. The red light will
blink twice.
3.
Press
MCP
once.
4.
Press and hold
SET
until the red
light blinks twice, then release
SET
.
FC1 And FC2 Keys
The
FC1
and
FC2
keys can be setup to per-
form a number of functions with a single
key press once the selection is programmed.
Repetitive, time-consuming operations can
be grouped for easy, convenient access
through the press of one key.
The
FC
keys are ideal for home theater oper-
ations, setting a favorite channel, adding to
multiple component uses, guide steps or
other multiple functions you would like to
control with one key press. On one key, you
can define and program a sequence of events.
Moreover, each
FC
key can hold up to 15 key
presses, allowing optimal individual cus-
tomization. Below are a few examples to get
you started.
Programming A Favorite Channel
With so many channels available through
your cable system or satellite provider, a
favorite channel can be programmed for easy,
direct channel selection with one key press.
For example, let’s assume your favorite pro-
grams are on channel 71. Use the following
instructions to program the
FC1
or
FC2
key
for this channel:
continued on next page...
9
OPERATING YOUR REMOTE CONTROL (continued)
REM400 Manual Engl 12/28/99 12:01 PM Page 9
