10
4
SPECIFICATIONS
4.1
Electrical
Display Tube:
35.6 cm (14-in) measured diagonally, 90°
deflection dot stripe pitch 0.65 mm.
Viewable Picture Area:
33.2 cm (13.1-in) measured diagonally.
Linearity:
Horizontal:
7%.
Vertical:
7%.
Horizontal Resolution:
450 TV lines, typical.
Video Input:
Composite Video:
0.3 to 1.5 Vp-p, sync negative. Manual
switching from 75
Ω
unbalanced to Hi-Z with loop-
through operation via the impedance switch.
Audio Input:
1 V line level.
Audio Output:
Loop-through line level, 1 W speaker.
4.2
Mechanical
Cabinet:
Material:
Steel with plastic front.
Finish:
Charcoal.
Dimensions:
356 W
x
380 D
x
333 H mm
(14
x
15
x
13.1-in).
Weight:
13.2 kg (29 lb).
4.3
Environmental
Temperature:
Operating:
0°C to 40°C (32°F to 104°F),
Storage:
–10°C to 50°C (14°F to 122°F).
Humidity:
10%–90%, noncondensing.
4.4
Agency Certifications
EMC:
Immunity:
EN50130-4.
Emission:
EN50081-1 1992, FCC Part 15, Class B.
Product complies with DHHS Rules 21 CFR applicable at the
date of manufacture.
Safety:
CE, LVD Requirement:
EN60065 1993.
ETL:
ANSI/UL1950.
cETL:
CAN/CSA_C22.2, No. 950.
5
TROUBLESHOOTING GUIDE
No Power Indicated:
The power plug may be loose or
disconnected.
Solution:
Insert the power plug firmly into the socket.
Power On, No Display:
(1) No video signal connected; (2)
Video cable is disconnected.
Solution:
(1) Verify that the
Video Input A/B Selector
switch
(Figure 1, Item 7)
is in the correct position; (2) Check video
cable for proper connection and correct accordingly.
Power On, No Sound:
(1) Incorrect cable connection
configuration; (2) Audio cable is disconnected; (3) Volume
output is set too low.
Solution:
(1) Ensure that cable connection configuration is
correct (see
Section 2.4
); (2) Connect audio cable firmly;
(3) Adjust speaker volume via the volume control on the front
panel (
Figure 1, Item 1
).
Display Jitter:
The monitor may be close to a device generating
a strong magnetic field.
Solution:
Move the device away from the monitor until picture
stabilizes.
No Color, Incorrect Color, or Dark Color:
The picture control
setting (e.g. Tint, Color, Brightness, or Contrast) may be set
improperly.
Solution:
Reset each picture control setting to the mid-range
level.
Unnatural Color, Irregular Color, or Distorted Picture:
The
monitor may be close to a speaker, magnet, or any other device
generating a strong magnetic field.
Solution:
Move the device away from the monitor and
discontinue power to the monitor. Wait at least 3 minutes, then
restore power to the monitor.
Picture Overexposure:
The video input signal is not
terminated.
Solution:
Ensure that the video impedance switch
(Figure 1,
Items 9 & 10)
on the rear panel for that channel is set to the
75
Ω
position, which properly terminates the signal.
Содержание LTC 2813/90
Страница 1: ...LTC 2813 90 ColorVideo Monitor Installation Instructions Eng Philips Communication Security Imaging ...
Страница 2: ...2 ...
Страница 11: ...11 ...
