Philips Linea V M350 страница 45 Скачать руководство пользователя

Страница: 45 / 48

Bad audio (crackles, echo, etc.)

•

The handset is nearly out of range.
Move it closer to the base station.

•

The phone receives interference
from the nearby electrical
appliances. Move the base station
away from them.

•

The phone is at a location with
thick walls. Move the base away
from them.

•

The phone receives interference
from the DSL (digital subscriber
line) connection. Install a DSL filter
to prevent the noise. Contact your
service provider for the DSL filter.

•

Other USB power supply may
generate hum noise. Use only the
original power supply listed in the
user instruction.

The handset does not ring.

•

Make sure the handset ringtone is
turned on.

•

Make sure the handset is
registered to the base station.

The caller ID does not display.

•

The service is not activated. Check
with your service provider.

•

The caller's information is withheld
or unavailable.

•

The handset is registered to other
DECT base station.

Note

•

If the above solutions do not help,
disconnect the power supply from both the
handset and base station. Try again after 1
minute.

Содержание Linea V M350

















































Результаты поиска

Содержание Linea V M350

Отзывы:

Похожие инструкции для Linea V M350

Бренды по названию

Популярные бренды

Philips Linea V M350, Расширенная пользовательская документация

Результаты поиска

Содержание Linea V M350

Отзывы:

Похожие инструкции для Linea V M350

Бренды по названию

Популярные бренды