4-1
FL13.16-A_DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following “Reference Notes in the
Table.”
Precautions concerning the LCD Panel
Assembly:
1. When you disassemble/re-assemble the Front
Cabinet
• Do not pull the FFC Cable and Board Cable
forcefully when you re-assemble.
• Be careful not to scratch the display panel when
assembling.
• The screw tightening torque must be 6kgf·cm
(5.2lb·in).
• Make sure to replace the Sensor Lens to a new one
when replacing the Front Cabinet.
• Be careful not to scratch the rear frame when
disassembling/re-assembling or when tightening the
screws.
Step/
Loc.
No.
Part
Fig.
No.
Removal
Note
[1]
Stand
Hinge
Assembly
D1 4(S-1), 4(S-2)
---
[2]
Stand Base
Assembly
D1 ---------------
---
[3]
Rear Cover
D1 5(S-3), 6(S-4)
---
[4]
Power
Supply
CBA
D2
D5
4(S-5), CN501,
CN601, CN1001
---
[5]
Digital Main
CBA Unit
D2
D5
4(S-6), CN3013,
CN3101, CN3801,
Jack Holder
---
[6]
Speaker
D3 ---------------
---
[7]
Bottom
Cover L
D3 2(S-7), (S-8)
---
[8]
Bottom
Cover R
D3
2(S-9), (S-10),
Function Knob
---
[1] Stand Hinge
Assembly
[3] Rear Cover
[9] Function
CBA Unit
[10] Stand Bracket
[11] LCD Panel
Assembly
[6] Speaker
[13] Front Cabinet
[2] Stand Base
Assembly
[4] Power Supply
CBA
[7] Bottom
Cover L
[8] Bottom
Cover R
[12] IR Sensor
CBA Unit
[5] Digital Main
CBA Unit
[9]
Function
CBA Unit
D3
D5
CN4001
2
[10]
Stand
Bracket
D3 4(S-11)
---
[11]
LCD Panel
Assembly
D3 ---------------
---
[12]
IR Sensor
CBA Unit
D4 Sensor Plate
2
[13]
Front
Cabinet
D4
11(S-12), Blind Label,
Sensor Lens
1
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal
Note
