
Mechanical Instructions
EN 6
LC4.6E AA
4.
4.
Mechanical Instructions
Index of this chapter:
4.1 Cable Dressing
4.2 Service Position
4.3 Assy/Panel Removal
4.4 Set Re-assembly
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassemble instructions in described order.
4.1
Cable Dressing
Figure 4-1 Cable dressing
4.2
Service Position
First, put the TV set in its service position. Therefore, place it
upside down on a table top (use a protection sheet or foam
bars).
4.2.1
The Foam Bars
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580) can be used for
all types and sizes of Flat TVs. By laying the plasma or LCD TV
flat on the (ESD protective) foam bars, a stable situation is
created to perform measurements and alignments. By first
placing a mirror flat on the table under the TV you can easily
see if something is happening on the screen.
4.2.2
The Aluminium Stands
Figure 4-3 Aluminium stands
The aluminium stands (order code 3122 785 90480) can also
be used to do measurements and alignments. The stands are
also very suitable to perform duration tests. With this stands the
set does not take much space, has no risk of over heating, and/
or falling. The stands can be mounted and removed quickly and
easily with use of the provided screws, which can be tightened
and loosened manually without the use of tools.
Caution: Only use the screws provided, otherwise it is possible
to damage the monitor inside.
E_14710_011.eps
020804
E_06532_018.eps
170504
E_06532_019.eps
170504