IntelliVue Arm Assembly Instructions
12
step 5
attach adapter to monitor arm.
Insert the adapter (61302-#-XXX) in the
end of the forearm.
Align the IntelliVue connector plug
(included with the IntelliVue) over the
adapter (61302-#-XXX) and tighten using
the (4) 1/4-20 x 1/2" Philips Flat Head
Screws (P700987).
Slide the collar (8240-XXX) up the pole
and tighten the set screw to secure. Slide
the washer (P700566) and retaining ring
(P700567) onto the pole. Secure the
retaining ring with retaining ring pliers.
Retaining ring pliers can be purchased at
your local hardware store.
NOTE:
Attach the IntelliVue connector plug to the
adapter and tighten using screws.
1/4-20 x 1/2"
Philips Flat Head Screw
Part No. P700987
Monitor Arm
Part No. 6958-#-XXX
Pole
Part No. 61302-#-XXX
Aluminum Collar
Part No. 8240-XXX
Washer
Part No. P700566
Retaining Ring
Part No. P700567
