12
The battery is full, the talk time
can go up to 14 hours.
The battery is empty. Charge it.
The handsets turn off if the battery is empty. If
you are on the phone, you hear warning tones
when the battery is almost empty. The call gets
disconnected after the warning.
Set the country
To make the phone work, select your country.
1
When you see the welcome message,
press
[OK]
, select your country, press
[SELECT]
to confirm.
The country setting is saved.
»
2
Set the date and time.
The phone is now ready to use.
»
To set the date and time later, press
»
[BACK]
to skip this setting.
Set the date and time
1
Press
menu
.
2
Select
[CLOCK & ALARM]
>
[SET
DATE/TIME]
, then press
[SELECT]
to
confirm.
3
Press the numeric buttons to enter the
date, then press
[OK]
to confirm.
On the handset, the time set menu is
»
displayed.
4
Press the numeric buttons to enter the
time.
If the time is in 12-hour format, press
•
to select
[AM]
or
[PM]
.
5
Press
[OK]
to confirm.
Set the date and time format
1
Press
menu
.
Warning
Check the battery polarity when inserting in
•
the battery compartment. Incorrect polarity
may damage the product.
a
The batteries are pre-installed in the
handset. Follow the direction of the
arrow printed on the battery tape and
pull it off from the battery door before
charging.
b
Place the handset on the charging cradle
to charge the handset.
Note
If the handset becomes warm when the
•
batteries are being charged, it is normal.
Check the battery level
The battery icon displays the current battery
level.
EN
IFU_ID965_05_EU_EN.indd 12
2009-11-20 14:02:33