44
3139 115 2xxx1
English
Sound and Volume Controls
SUBWOOFER
SONOWAVE
SUBW
SURR
SOUND
MUTE
VOL
+-
Speakers (SonoWave speakers)
adjustment
You can adjust the SonoWave speakers
setting according to your room
environment and setup for optimum
performance.
IMPORTANT!
The SonoWave speakers must be
placed at equal distance from the
TV.
1
Press
SONOWAVE
on the remote.
➜
There are three parameters to adjust
the SonoWave speakers : “
ROOM
ACOUSTICS
”, “
SPEAKER DISTANCE
”
and “
LISTENING POSITION
”.
2
Use
3
4
keys to select one of the
options and press
OK
to adjust the
setting.
{
ROOM ACOUSTICS
}
●
Use
3
4
keys to select the condition of
the room and press
OK
to confirm.
➜
“
HARD
” for concrete/glass walls.
➜
“
SOFT
” for wooden walls.
{
SPEAKER DISTANCE
}
●
Use
3
4
keys to select the distance
(refer to ‘X’ in the below diagram)
between the two SonoWave speakers
and press
OK
to confirm.
➜
“
NEAR
” – ‘X’ is less than 1m (3’ 5”)
➜
“
DEFAULT
” – ‘X’ is between 1m
(3’ 5”) to 2.5m (7’ 62”)
➜
“
FAR
” – ‘X’ is more than 2.5m (7’ 7”)
{
LISTENING POSITION
}
●
Use
3
4
keys to select the distance
(refer to ‘Z’ in the below diagram) from
the listening position and press
OK
to
confirm.
➜
“
NEAR
” – ‘Z’ is less than 1.5m (4’ 7”)
➜
“
DEFAULT
” – ‘Z’ is between 1.5m
(4’ 7”) to 2.5m (7’ 7”)
➜
“
FAR
” – ‘Z’ is more than 2.5m (7’ 7”)
FRONT R
FRONT L
TV
X
Z
3
Press
SONOWAVE
again to exit the
setting or it will exit automatically if you
do not press any buttons within 10
seconds.
001-053-hts8000-37-Eng14a
7/2/05, 10:22 AM
44
