Philips HTS5110 Скачать руководство пользователя страница 9

Страница: 9 / 53

6-1

•

Special information for BGA-ICs:

- always use the 12nc-recognizable soldering

temperature profile of the specific BGA (for de-

soldering always use the lead-free temperature

profile, in case of doubt)

- lead free BGA-ICs will be delivered in so-called

'dry-packaging' (sealed pack including a silica gel

pack) to protect the IC against moisture. After

opening, dependent of MSL-level seen on indicator-

label in the bag, the BGA-IC possibly still has to be

baked dry. (MSL=Moisture Sensitivity Level). This

will be communicated via AYS-website.

Do not re-use BGAs at all.

• For sets produced before 1.1.2005 (except products

of 2004), containing leaded solder-alloy and

components, all needed spare-parts will be available

till the end of the service-period. For repair of such

sets nothing changes.

• On our website

www.atyourservice.ce.Philips.com you find more

information to:
• BGA-de-/soldering (+ baking instructions)
• Heating-profiles of BGAs and other ICs used in

Philips-sets

You will find this and more technical information within

the “magazine”, chapter “workshop news”.
For additional questions please contact your local

repair-helpdesk.

How to Remove / Install Flat Pack-IC

Special Information of BGA IC & Flat Pack-IC

1. Removal

With Hot-Air Flat Pack-IC Desoldering Machine:
1. Prepare the hot-air flat pack-IC desoldering

machine, then apply hot air to the Flat Pack-IC

(about 5 to 6 seconds). (Fig. S-1-1)

2. Remove the flat pack-IC with tweezers while

applying the hot air.

3. Bottom of the flat pack-IC is fixed with glue to the

CBA; when removing entire flat pack-IC, first apply

soldering iron to center of the flat pack-IC and heat

up. Then remove (glue will be melted). (Fig. S-1-6)

4. Release the flat pack-IC from the CBA using

tweezers. (Fig. S-1-6)

CAUTION:
1. The Flat Pack-IC shape may differ by models. Use

an appropriate hot-air flat pack-IC desoldering

machine, whose shape matches that of the Flat

Pack-IC.

2. Do not supply hot air to the chip parts around the

flat pack-IC for over 6 seconds because damage

to the chip parts may occur. Put masking tape

around the flat pack-IC to protect other parts from

damage. (Fig. S-1-2)

Fig. S-1-1

Содержание HTS5110






















































Результаты поиска

Содержание HTS5110

Отзывы:

Похожие инструкции для HTS5110

Бренды по названию

Популярные бренды

Philips HTS5110, Руководство по обслуживанию

Результаты поиска

Содержание HTS5110

Отзывы:

Похожие инструкции для HTS5110

Бренды по названию

Популярные бренды