Philips HTS5100B, Руководство пользователя

Страница: 32 / 56

EN 32
RADIO OPERATIONS
Before you start .....
Connect the supplied FM wire antenna to the inner pin of
the FM ANT 75
Ω
jack. Extend the FM antenna and fix its
ends to the wall for optimum reception.
1) Press [SOURCE] repeatedly until “FM” appears on
the front panel display.
2) Press [
s
/
B
] on the remote control to start tuning.
The frequency indication starts to change until a radio
station with sufficient signal strength is found.
3) Repeat step 2) if necessary until you find the desired
radio station.
4) To fine-tune the reception of a weak station, press
[
K
/
L
] briefly and repeatedly until an optimal
reception is found.
You can store up to 15 FM preset radio stations in the
memory. To store the radio stations, follow the following
procedure.
1) Tune to your desired radio station (see “Tuning to
Radio Stations” on this page).
2) Press [OK].
3) Press [PREV
S
/ NEXT
T
] or use [the Number
buttons] to select a preset number that you want to
store the current radio station.
4) Press [OK] to store.
1) Press [SOURCE] repeatedly until “FM” appears on
the front panel display.
2) Press [PREV
S
/ NEXT
T
] or use
[the Number buttons] to select a preset radio
station.
The preset number and radio frequency appear on the
front panel display.
1) In FM mode, press [PREV
S
/ NEXT
T
] to select a
preset radio station.
2) Press and hold [STOP
C
] until “DELETED” appears
on the front panel display.
• The radio station continues to play but has been
deleted from the preset list.
• The rest of the preset radio stations remain
unchanged.
Note
• For better FM stereo reception, connect an external
FM antenna (not supplied).
• Position the antenna as far away as possible from
your TV, VCR or other radiation source to prevent any
unwanted interference.
Tuning to Radio Stations
Presetting Radio Stations
Note
• This unit exits presetting mode if no button is
pressed within 20 seconds.
• If no stereo signal is detected or less than 5 (five)
stations are detected during radio installation,
“CHECK ANTENNA” appears on the front panel
display.
Selecting a Preset Radio Station
Deleting a Preset Radio Station