41
[Audio Sync]
Sets the default delay time for audio output
when you play a video disc.
1) To start, press
OK
.
2) Select a speaker delay in the menu, then
press
to set the delay time.
3) Press
OK
to con rm and exit.
[Speakers Delay]
Sets the delay time for the center and rear
speakers if they are placed closer to the
listening position, so that the sound output
from all speakers reach the listening position
at the same time.
1) To start, press
OK
.
2) Select a speaker in the menu, then press
to set the delay time.
3) Press
OK
to con rm and exit.
Note
Allow 1ms setting for every 1 foot distance
•
between the speaker and the listening position.
[HDMI Audio]
Selects the HDMI audio setting when you
connect this Home Theater System and the
TV with a HDMI cable.
•
[On]
– Allows audio output through the
TV and the speaker system. If the audio
format on the disc is not supported, it
will be downmixed to two-channel sound
(linear-PCM).
•
[Off]
– Disables audio output from the
TV. The sound is only output through the
speaker system.
[CD Upsampling]
Converts the music CD to a higher sampling
rate using sophisticated digital signal
processing for better sound quality.
•
[Off]
– Disables CD-upsampling.
•
[88.2kHz (X2)]
– Converts the sampling
rate of the CDs twice as high as the
original rate.
Note
CD upsampling is only available in stereo
•
mode.
Adjust settings
English
EN
