Philips HTS3566D, Быстрый старт

Страница: 49 / 66

49
English
Presetting radio stations
You can store up to 40 FM preset radio
stations in the memory. There are three
different ways to program the radio
stations:
– Using auto install (for fi rst time setup
only)
– Using automatic preset
– Using manual preset
Helpful Hints:
– This unit exits presetting mode if no
button is pressed within 20 seconds.
– If no stereo signal is detected or less than
5 (fi ve) stations are detected during radio
installation, ‘CHECK ANTENNA’ appears.
Using auto install
When you access the ‘RADIO’ mode for
the very fi rst time, you will be prompted
to install the radio stations. With this
feature, you can install all the available
radio station automatically with one
touch of button.
RADIO
A
Press RADIO .
‘AUTO INSTALL ... PRESS PLAY’
appears.
B
Press
u
.
All the available radio stations with
strong signal will be stored automatically.
Once complete, the fi rst tuned radio
station will be played back.
Radio Operations
(continued)
Using automatic preset
Use automatic presetting to store or
reinstall all the preset radio stations.
RADIO
A
Press RADIO to select ‘FM’ band.
B
Press and hold REPEAT (PROGRAM)
until ‘START ...’ appears on the display
panel.
All previously stored radio stations
will be replaced.
Using manual preset
Use manual presetting to store your
favorite radio stations.
A
Tune to your desired radio station (see
‘Tuning to radio stations’).
B
Press REPEAT (PROGRAM) .
C
Press
í
/
ë
or use the numeric
keypad 0-9 to select a preset number
that you want to store the current radio
station.
D
Press REPEAT (PROGRAM) to store.
1_hts3566D_78_eng1.indd 49 1_hts3566D_78_eng1.indd 49 10/14/2008 4:47:37 PM 10/14/2008 4:47:37 PM