Philips HTS3548W/55, Руководство по обслуживанию

Страница: 7 / 44

2 - 1 2 - 1
System , Region Code , etc. Setting Produre
1)System Reset
a) press “setup “ button on R/C,TV will show preference page
b) select the menu using the and on R/C
c) go preference page to do sysytem reset
2)Region Code Change
a) press the “stop” button on R/C in open model
c) press”7” “3“ “4“ “4“ “6“ “6“ on R/C,then input desired number
to change region code :
1 USA
2 EU
3 AP
4 Australia ,NZ , Latam
5 Russia , INDIA
6 CHINA
3)Version Control Change
a) In open model, press “1“ “5“ “9“ on R/C
b) press “ok” button to confi rm
c) TV will show message as below:
4)Password Change
a) press “setup “ button on R/C,TV will show preference page
b) select the menu using the and on R/C
c) go preference page select “password“ to change
* 000000 is default password supplied.
5)Check on the Sofeware Version
a) open the CD Door
b) press “display“ buttom on R/C
c) TV will show the version on screen
6)Upgrading new sofeware
a) open the CD Door,then insert the CD-R program disc
b) close the CD Door.
c) VFD will show:
“Loading“
“Erase” -- erase the fl ash memory
“Writing” about 2 minutes
“done “
* the latest upgraded is in version VER 00.25.05_70504_00
Current model 3548W-55
Ver 00.25.05_70504_00 region : 4
Servo: OF.60.00.00
8032: 05.00.04.06 RISC:00.00.03.03
IF current model does not match you set use down arrow
key on the remote to change
OK
CAUTION!
This information is confi dential and may not be
distributed.Only a qualifi ed service person should
reprogram the Region Code.