Philips HTS3530, Руководство по обслуживанию

Страница: 35 / 64

4-1
Softeware upgrade
1.Switch to DISC state, and open the tray, then press "5" "5" use the remote control. The OSD will
display the upgrade filename ,
You must rename the bin file according the OSD tip
;
2.Then Copy the renamed bin file(upgrade file) to the root menu of USB device;
3. Connect the USB device to HTS, and Press “USB” on remote control switch to USB state;.
4.If the upgrade file is renamed correctly, It will display the Upgrade Menu on TV, press “OK” key
on the remote control to start upgrade;
5.After a while,the tray will open automatically ,but must not power off the player, and you can
remove your USB device now;
6.Don't power off, wait until the player auto standby. The whole upgrade process may need 2
minutes.
7.After the LED light get red(HTS standby, upgrade completely),press “DISC” key on remote
control to power on, then you can check the software version information as below steps;
B. Read out the software versions to confirm upgrading
1) Power on the set and press "Setup" button on the remote control.
2) Press "1""3""7""9" button or press down cursor on remote control to select "Preferences" and
press right & down cursor to select "Version Info".
The software version and other informations will be displayed on the TV screen as follows:
File Name HTSXXXX_XX.BIN
Version XX.XX.XX.XX (Main version)
Sub-Ver XX.XX.XX.XX (version of
applicaton software)
RISC XX.XX.XX.XX
Servo
XX.XX.XX.XX (software version
of Servo)
Region Code X HDCP PASS MCU XX
Caution: The set must not be power off during
upgrading, Otherwise the Main board will be damaged
entirely.