Philips HTS3220, Руководство пользователя

Страница: 16 / 22

14
Change general settings
1
Press SETUP .
2
Select [General Setup] , then press OK .
3
Select and adjust the following settings:
• [EasyLink Setup] : Sets up EasyLink to
enjoy easy controls of all the HDMI
CEC compliant devices using a single
remote control (see ‘Use Philips
EasyLink’ on page 13 ) .
•
[Disc Lock] : Restricts play to disc.
Password (PIN code) is required to
unlock the disc before play.
• [Display Dim] : Changes the brightness
of the display panel.
• [OSD Language] : Selects the on-
screen display menu language.
• [Screen Saver] : Enables or disables
screen saver mode. If enabled, the
screen enters idle mode after 10
minutes of inactivity (for example, in
pause or stop mode).
•
[Sleep Timer] : Sets a sleep timer to
switch the home theater to standby
after a speci c time.
•
[DivX® VOD Code] : Displays the
DivX VOD registration code for the
home theater.
4
Press OK to con rm your choice.
Note
Before you purchase DivX videos and play them
•
on the home theater, register the home theater
on www.divx.com using the DivX VOD code.
Change audio settings
1
Press SETUP .
2
Select [Audio Setup] , then press OK .
3
Select and adjust the following settings:
•
[HDMI Audio] : Enables or disables
HDMI audio output for the TV.
4
Press OK to con rm your choice.
Note
For settings related to HDMI, the TV must be •
connected through HDMI.
6 Change settings
This section helps you to change the settings of
your home theater.
Caution
Most of the settings are already con gured
•
with the best value for the home theater.
Unless you have a speci c reason to change a
setting, it is best to leave it at the default value.
Access the setup menu
1
Press SETUP .
The following menu appears.
»
Symbol Description
[General Setup]
[Audio Setup]
[Video Setup]
[Preference Setup]
2
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of your
home theater.
3
Press BACK to return to the previous
menu, or press SETUP to exit.
Note
You cannot change a setting that is grayed out.
•
EN