Philips HTS3180, Руководство пользователя

Страница: 23 / 38

23
Search and store radio stations
individually
1
Press RADIO .
2
Press / .
It starts searching until a radio station
»
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To fi netune the radio frequency, •
press / .
4
Press PROGRAM .
The preset station number blinks.
»
If no action is carried out within 20
»
seconds after the above step, it exits
the preset mode.
5
Press / (or the Numeric buttons ) to
select a preset number to store.
6
Press PROGRAM to confi rm.
Change tuning grid
In some countries, the frequency step
between adjacent channels in FM band is 50
kHz or 100 kHz.
Note
This feature only applicable for certain region.
•
Change tuning grid erases all preset radio
•
stations.
1
Press RADIO .
2
Press .
3
Press and hold until ‘GRID 9’ or
‘GRID 10’ is displayed.
‘GRID 9’ for 50 kHz and ‘GRID 10’ for
»
100 kHz.
2
Press .
All detected radio stations are stored.
»
Once complete, it tunes to the fi rst
»
preset radio station.
To stop auto tuning, press • .
Note
This Home Theater System can store up to a
•
maximum of 40 radio stations.
If auto installation is not activated or less
•
than 5 radio stations are stored, you will be
prompted to install the radio stations again.
Listen to radio
1
Press RADIO .
2
Use the remote control to control the
radio.
Button Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for •
other radio stations remain
unchanged.
Reinstall all the radio stations
1
Press RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are
»
replaced.
Note
Check the radio antenna connection if no
•
stereo signal is detected or less than 5 stations
are detected during radio installation.
English
EN