EN 10
3139 785 31460
4.
Dismantling Instructions & Service Positions
D
Figure 4-4
C
E
4.2
Dismantling of the Tuner Module,
MONO Board, Front Board, PSU Module
1) Loosen 1 screw A (see Figure 3-3) to remove the Tuner
Module
(pos
1040).
2) Loosen 9 screws B (see Figure 3-3) and 4 screws
(see Figure 3-4) to remove MONO Board.
3) Release 4 snap hooks to remove Front Board.
- 1 snap hook each on the left & right side (pos 161).
- 2 snap hooks on the bottom side (pos 161).
4) Loosen 4 screws E (see Figure 3-4) to remove the
PSU
Module.
4. Dismantling Instructions
4.1
Dismantling of the DVD Loader
1) The tray can be manually open by inserting a minus
screw drive and push the lever in the direction as shown
in Figure 3-1 to unlock the tray before sliding it out.
Figure 4-1
2) Slide out the tray and remove the Cover Tray (pos 110)
as shown in Figure 3-2.
Figure 4-2
3) Loosen 5 screws to remove the Front Top.(pos 240)
- 1 screw each on the left & right side (pos 272)
- 3 screws behind
4) Loosen 4 screws C (see Figure 3-4) to remove the DVD
Loader.
B
B
B
A
Figure 4-3
