Philips HTL3150B, Руководство пользователя, Страница: 14 / 22

12
EN
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected device,
this product automatically switches to standby
after 15 minutes of button inactivity and no
audio/video play from a connected device.
Set display brightness
You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.
If you select
AUTO OFF
, LED message is
switched off after 10 seconds of button
inactivity.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1
In any source mode, on the remote control
press
Volume -
,
BASS -
, and
TREBLE -
in
sequence within three seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
5 Update software
To get the best features and support, update
your product with the latest software.
Check software version
In any source mode, on the remote control
press
TREBLE -
,
BASS -
, and
Volume -
in
sequence.
» The software version number is displayed
on the display panel.
Update software via USB
1
Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2
Download the software into a USB storage
device.
a Unzip the download if zipped, and
make sure that the unzipped file is
named "HTL3150.bin".
b Put the "HTL3150.bin" file in the root
directory.
3
Connect the USB storage device to the
( USB ) connector on this product.
4
Press HDMI ARC to switch this product to
the HDMI ARC source.
5
On the remote control, within six seconds
press twice then once, and
then hold down SURR (MOIVE) .
» On the display panel, "UPG" (upgrade)
blinks slowly, then blinks quickly.
6
When "UPG" blinks fast, press to start
the update.
»
Then "UPG" (upgrade) is displayed on
the display panel.