11
EN
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the
AUDIO IN
connector on this product.
2
Press
AUDIO IN
on the remote control.
3
Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS file systems, and complies
with the Mass Storage Class.
•
An MP3 file on a USB storage device
1
Connect a USB storage device to this
product.
2
Press
USB
on the remote control.
3
Use the remote control to control play.
• Press
to start, pause or resume play.
• Press / to skip to the previous or
next track.
• During USB play, press and hold
USB
to
enter repeat mode, then press
USB
to
select one of the following play modes.
•
ONE RPT
: repeat the current track.
•
ALL RPT
: repeat all the tracks in one
folder.
•
SHUFFLE
: play randomly in one folder.
•
OFF RPT
: exit repeat or shuffle play
mode.
Note
•
This product may not be compatible with certain types
of USB storage device.
•
If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
•
Digital camera PTP and MTP protocols are not
supported.
•
Do not remove the USB storage device while it is
being read.
•
DRM-protected music files (MP3) are not supported.
•
Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected device,
this product automatically switches to standby
after 15 minutes of button inactivity and no
audio/video play from a connected device.
Set display brightness
You can press
DIM
repeatedly to select a
different brightness level of the display panel on
this product.
If you select
AUTO OFF
, LED message is
switched off after 10 seconds of button
inactivity.
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1
In any source mode, on the remote control
press
Volume -
,
BASS -
, and
TREBLE -
in
sequence within three seconds.
»
When the factory settings restore is
complete, the product automatically
switches off and restarts.
Содержание HTL2193B
Страница 2: ......
