12
EN
Set up the wired network
What you need
•
A network cable (RJ45 straight cable).
•
A network router (with DHCP enabled).
1
Using a network cable, connect the
ETHERNET
connector on your
SoundStage to the network router.
2
Press .
3
Select
[Setup]
, and then press
OK
.
4
Select
[Network]
>
[Network
installation]
>
[Wired (Ethernet)]
.
5
Follow the onscreen instructions to
complete the setup.
•
If connection fails, select
[Retry]
, and
then press
OK
.
6
Select
[Finish]
, and then press
OK
to exit.
•
To view the network settings, select
[Setup]
>
[Network]
>
[View
network settings]
.
ETHERNET
ETHERNET
www
5 Use your
SoundStage
This section helps you use the SoundStage to
play media from a wide range of sources.
Before you start
•
Make the necessary connections described
in Quick start guide and User manual.
•
Switch the TV to the correct source for
the SoundStage.
Access the home menu
The home menu provides easy access to
connected devices, setup and other useful
features in your SoundStage.
1
Press .
»
The home menu is displayed.
2
Press the
Navigation buttons
and
OK
to
select the following:
•
[play Disc]
: Start disc play.
•
[browse USB]
: Access the USB
content browser.
•
[Voole]
: Access Voole service.
•
[browse PC]
: Access the computer
content browser.
•
[Setup]
: Access menus to change video,
audio and other settings.
3
Press to exit.
Discs
Your SoundStage can play DVDs, VCDs, CDs,
and Blu-ray discs. It can also play discs that
you’ve made at home, such as CD-R discs of
photos, videos, and music.
1
Insert a disc into the SoundStage.
