ENGLISH
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
5
Separate the cutter from the comb and
clean with a small brush or rinse clean
under hot water.
6
Replace the cutter back onto the Shaving
Unit making sure the blades are pointing
upwards.
C
7
Place the razor head comb back onto the
Shaving Unit.
Be sure to replace the comb back into the
original razor head before cleaning the next set.
C
8
Turn the razor head counterclockwise
until it locks into place.
9
Repeat the process for the other two sets
of cutters and combs.
C
10
Replace Shaving Unit back on razor and
push down (you will hear a click).
The Shaving Unit will only fit correctly in one
position on razor. Make sure to align the 2
shaving lotion dispensing holes on the Shaving
Unit with the 2 shaving lotion tubes on the razor.
20
ENGLISH
Replacing Cartridges
◗
For optimal shaving results, it is recommended
to replace the upgraded shaving conditioner
cartridge once a year.
◗
A new empty cartridge is supplied with each
new Replacement Shaving Unit (Model HS85).
Shaving Conditioner Cartridge
C
1
Remove the shaving conditioner cartridge
from the back of razor.
C
2
Insert the hinge at the top of the new
shaving conditioner cartridge into the slot
in the rim of the razor back (
1
). Then
press the bottom part of the cartridge
with your thumb (2) to attach the
cartridge to the razor. You will hear a
‘click’.
3
The shaving conditioner cartridge is
now ready to be filled (see ‘Filling Razor
Cartridge’ section).
21
