8 Environment
Do not throw away the appliance with normal household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing this, you can help to preserve the environment.
9 Troubleshooting
If you encounter problems when using this juicer, check the following points before requesting
service. If you cannot solve the problem, contact the Philips Consumer Care Center in your country.
Problem
Solution
The juicer does not work.
The juicer is equipped with a safety system. If the accessories are
not properly connected with the motor unit, the juicer does not
work. Check whether the accessories have been connected in
the right way (see the various sections). Turn off the juicer first!
This appliance is equipped with overheat protection. If the
appliance overheats, it switches off automatically. Unplug
the appliance and let it cool down for 10 minutes. Then put
the mains plug back into the wall socket and switch on the
appliance again. (HR1849 and HR1848 China only)
The knife unit/ motor unit is
blocked.
Turn off the juicer and process a smaller quantity.
The motor unit gives an
unpleasant smell during the
first few times of use.
This is normal for the first few applications. If the smelling
continues, check the quantity you are processing, the
application time, or used speed.
The blender shows leakage.
Turn off the juicer. Release the knife unit by turning it anti-
clockwise. Check whether the rubber ring is properly
assembled on the knife unit (rest on flat position).
The lid and/or measuring cup
of the blender show leakage.
Make sure the lid is attached properly, and the measuring cup
fits well.
The sieve of the juicer
makes contact with the
feeding tube or shows a high
vibration during processing.
Turn off the juicer. Check if the sieve is properly connected.
The ribs on the bottom of the sieve should fit properly on the
motor coupling opening.
Check if the sieve is not damaged. Cracks, fissures, loose grater
disc or any other irregularity may cause malfunction.
Notes
• Dry ingredients must not be processed for more than 1 minute.
• While the motor is running, ingredients (for examples: ice cubes and tomatoes) can be added into
the blender through the opening in the lid.
• Make sure to position the sieve of the lid is in front of the spout of the jar for smooth liquid pouring.
• To disassemble the blender, follow the instructions above in reverse order and direction.
• Refer to the end of this user manual for the recommended quantities, speed settings, and processing time.
Cautions
• Be careful not to exert too much pressure on the handle of the jar.
• Never fill the jar with ingredients that have a temperature of over 60°C.
• Never overfill the blender jar above the maximum level indication (1.0 liters) to avoid spillage.
• Always insert the measuring cup into the lid before you start processing.
• Do not run the blender for more than 3 minutes at a time. If you have not finished blending after
3 minutes, switch the blender off and let it cool down to room temperature before you continue
processing.
• Never put your hand or any object in the jar while the blender is running.
• Always set the control knob to 0 before you open the lid.
5 Cleaning
It is easiest to clean the juicer, its parts and accessories immediately after use.
Notes
• Unplug the juicer before you started cleaning it.
• Wait until the juicer has cooled down sufficiently before cleaning it.
• All detachable accessories can be cleaned in dishwasher.
• Clean the motor unit with a moist cloth.
• Do not use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol,
alcohol or acetone to clean the appliance.
1
1
After you unplug the juicer, detach the used accessories, rubber rings, and parts and clean
them in lukewarm washing up liquid.
2
Rinse all accessories and parts under a tap.
3
To clean the blender jar, pour lukewarm water and some detergent into it.
4
Assemble the lid and the measuring cup, and then let the blender runs for a few seconds.
5
Detach the blender jar, knife unit, and remove the lid and measuring cup. Clean and rinse them as well.
6
For better cleaning, you can use the brush to clean.
6 Storage
1
Keep it in dry places to avoid the sieve, blades get rusty.
2
Plug could be inserted into the main unit for storage.
7 Recipes
With 2-in-1 Juicer, you can experiment endlessly and try out all kind of recipes. You can make
delicious juices, shakes, soups, and sauces in no time at all. To give you an idea of the possibilities,
you can go to www.kitchen.philips.com.
For Juicing
Ingredients
Weight
Speed
Cucumbers/ Spinach/ Melons/ Tomatoes/ Oranges/ Lemon/ Grapes/ Berries
500g
1
Apples/ Carrots/ Pineapples/ Beetroots/ Celery/ Pear
500g
2
For blending, milling, and chopping
Features
Ingredients
Weight | Speed - 2
Time
Blending
Smoothies
1000ml
60 sec.
Shakes & mixed drinks
1000ml
60 sec.
Fruits & vegetables
1000ml
60 sec
Soups
500ml
60 sec
Batters
1000ml
60 sec
Sauces
1000ml
60 sec
Baby food
500ml
60 sec
Ice
6 pieces (approx. 38x30x23mm)
15 x 1sec.
Tip
• For crushing ice in blender jar and chopping in chopper, it is suggested to use the pulse to have a
better result. That is to turn the appliance on and off to simulate the pulse effect.
