- Insert the mains plug into a wall socket.
- Press the On/Off switch
I
.
The orange pilot light “Heating up”
≤
will come
on (fig. 13).
- If the appliance is heated up, green pilot light
“Steam ready”
s
will come on.
The orange pilot light
≤
will go out (fig. 14).
You can now begin steam cleaning.
How to use
- Push the switch on the handgrip forwards
(fig. 15). After a few seconds steam will come
from the nozzle.
- You can adjust steam output using the steam
control (fig. 16).
• Initially there will be some condensation (drops
of water). Let steam escape freely during the
first few seconds until only fine steam is
produced.
• When steam cleaning with maximum steam
output, it is advisable to interrupt steaming from
time to time.
This enables the appliance to regain the
required pressure.
• During operation the steam tank heating
element wil be switched on automatically from
time to time (orange pilot light
≤
comes on),
alhough steam is still available.
You can just continue steam cleaning.
Remote Steam Control
With the steam control on the handgrip you can
select the most suitable steam output for various
applications:
• Maximum steam output: for cleaning from
some distance (hard to reach places!) using
the “Turbo” nozzle, sticking dirt and stubborn
spots.
• Maximum or normal steam output: for
normal cleaning (with steaming cloth) floors
and washable surfaces.
• Normal or minimum steam output: for
cleaning (with steaming cloth) rugs and
carpets.
• Minimum output: for ceramics, glass and
breakable objects.
Filling up water
During use red warning light
*
may come on.
This indicates that the water in the steam tank
has been used up.
To prevent overheating a safety switch will switch
off the steam tank heating element.
- Press On/Off switch
I
to switch the appliance
off.
- Remove the mains
plug from the wall
socket.
- Slowly and carefully
unscrew the filling cap,
until steam escapes
through the holes
(fig. 17).
- When steaming stops you can unscrew the
filling cap further.
- Fill the steam tank as described in section
“Filling the steam tank”.
- Switch the appliance on as described in section
“Switching on”.
• Never switch the appliance on if it is empty.
Normal cleaning with a steaming cloth
- Fix a dry and clean cloth to the large brush
nozzle using the special clamps
(fig. 18 and 19).
6
17
13
14
15
NOR.
MAX.
MIN.
16
19
18
