2
Press the release button (1) and remove the
shaving unit (2).
3
To remove the retaining frame, push the sides
of the central spring towards each other (1).
Then lift the retaining frame out of the shaving
unit (2).
4
Slide the shaving heads out of the retaining
frame and clean them one by one.
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
performance. If you accidentally mix up the sets, it
could take several weeks before optimal shaving
performance is restored.
5
Clean the cutter with the short-bristled side of
the brush.
Brush carefully in the direction of the arrow.
6
Brush the guard.
EnglisH
9