Philips HP6520, Руководство пользователя

Страница: 8 / 42

general
- This symbol means that it is not allowed to use this appliance in a bath
or shower.
- This appliance complies with the applicable IEC safety standards.
- For safety reasons, this appliance can only be operated cordlessly.
- The adapter is equipped with an automatic voltage selector and is
suitable for mains voltages ranging from 100 to 240 volts.
Preparing for use
Charging
Charging the epilator takes approximately 1 hour. When the epilator is fully
charged, it has a cordless operating time of up to 30 minutes.
1 Switch off the appliance before you charge it.
2 Insert the appliance plug into the socket in the bottom of the
appliance (1) and put the adapter in the wall socket (2).
,
The charging light flashes white to indicate that the appliance is
charging.
,
When the battery is fully charged, the charging light lights up white
continuously for 20 minutes and then goes out.
Battery low or empty
- When the battery is almost empty, the charging light starts to flash
red. When this happens, the battery still contains enough energy for a
few minutes of epilating.
- When the battery is completely empty, the charging light lights up red
continuously. To charge the epilator, see section ‘Charging’ above.
EnglisH
8