Comb your hair and divide your hair into small sections that are not
5
wider than 5-6cm.
Move the support (
6
r
) backwards.
Create curls or ringlets
Press the lever (
1
s
) to open the clip (
p
) and place a section of hair
between the clip and barrel (
o
).
Release the lever and slide the barrel to the hair tip.
2
Hold the cool tip (
3
n
) and the handle, and then wind the section of
hair round the barrel from end to root.
If you use the attachment with the spiral, wind the section of hair
•
round the barrel following the spiral profile.
Hold the barrel in the position for max. 15 seconds, and then unwind
4
the section of hair until you can open the clip again with the lever or
until you can remove the spiral from your hair.
To style the rest of your hair, repeat steps 1 to 4.
5
Create waves
Wind a section of hair round the brush.
1
Hold the barrel in the position for max. 15 seconds, and then unwind
2
the section of hair to remove the brush from your hair.
To style the rest of your hair, repeat steps 1 to 2.
3
Create crimps
Press the lever (
1
s
) to open the attachment and place a section of
hair between the crimping plates. Start crimping at the roots.
Release the lever and keep the plates together for 5 to 10 seconds.
2
Press the lever to open the attachment and place a lower area of
3
the same section of hair between the plates. Make sure there is an
overlap.
Repeat this process until you have reached the hair tip.
4
To style the rest of your hair, repeat steps 1 to 4.
5
