2
Release the lever and keep the plates together for 5 to 10
seconds.
3
Press the lever to open the attachment and place a lower area
of the same section of hair between the plates. Make sure there
is an overlap.
4
Repeat this process until you have reached the hair tip.
5
To style the rest of your hair, repeat steps 1 to 4.
Create straight sleek style and flicks
1
Press the lever ( ) to open the attachment and place a section
of hair between the straightening plates.
2
Slide the styler down the length of the hair in a single motion
(max. 5 seconds) from root to end, without stopping to prevent
overheating.
•
To create the desired type of flick, turn the styler half-circle
inwards (or outwards) when it reaches the last 3-5 cm of the
hair tip. Hold the styler in that position for 2 to 3 seconds,
and then release it.
3
After 20 seconds, repeat step 2 until you achieve the desired
look.
4
To style the rest of your hair, repeat steps 1 to 3.
After use:
1
Switch off the appliance and unplug it.
2
Place it on a heat-resistant surface until it cools down.
3
Remove hairs and dust from the appliance and attachments.
4
Clean the appliance, straightening plates, and curling tongs by
damp cloth.
5
Keep the appliance in a safe and dry place, free of dust. You can
also store the appliance in the supplied storage pouch.
