Philips HP1500, Инструкция по эксплуатации

Страница: 19 / 30

OPTION 2: DIGITAL STEREO OR MULTI
CHANNEL SOURCE:
Connecting the digital base station to a digital
stereo source (CD player with S/PDIF output, etc.)
or a digital multichannel source (DVD player with
S/PDIF output, etc.)
Base station
1 Connect one side of the S/PDIF digital audio cable (included) to the
S/PDIF output of the audio source and the other side to the S/PDIF input
of the base station.
2 Next take the S/PDIF cable that most likely came supplied with your
digital audio source. Connect one side of this 2nd S/PDIF digital audio
cable (not included) to the S/PDIF input of your amplifier or home
cinema receiver and the other side to the S/PDIF output of the base
station.
When connecting your audio equipment in this way, you will be able to benefit
from the Automatic Audio Signal Routing (AASR) feature. As long as the base
station is powered – even in stand-by mode – the audio signal from the audio
source will be made available not only to the digital base station but it will be
routed through to the rest of your home entertainment set-up. Without the need
for swapping cables you can decide whether you wish to enjoy the audio
through your headphones or through for example the speakers of your home
entertainment system.
3 Check if the red RCA plug (right channel) is connected to the right
channel (red) of the audio source.
4 Power on your audio source: switch on your audio source, i.e.
DVD player with S/PDIF output, CD player with S/PDIF output, etc.
ENGLISH
19
0912HP_EU 09-12-2003 12:12 Pagina 19