Philips HI272/02, Руководство пользователя

Страница: 8 / 52

8
Spraying
At any temperature by pushing on the spray button
T
(C) a couple of
times the laundry can be damped down (fig. 4).
Ensure that there is enough water in the water reservoir.
Shot of Steam
By pressing button s (D) an intense "shot" of steam is emitted from the
soleplate (fig. 5).
This can be very useful e.g. when removing stubborn creases.
The "shot" of steam facility can be used only while ironing with high
ironing temperature (positions ranging from
2
to
3
).
You can apply max. five sequential shots of steam (with steam of good
quality).
Vertical position
“Shot of steam” can also be applied when holding the iron in a vertical
position. This is useful for removing creases from hanging clothes,
curtains, etc.
- Ensure that the water reservoir is filled-up completely.
- Set the temperature control to position
3 MAX.
- Wait a little while for the amber temperature pilot light to go out and to
come on again.
- Direct the soleplate towards the hanging clothes, curtains, etc. and
press button s (D).
• As soon as the steam output decreases, hold your iron horizontally and
wait a few seconds before using “Shot of steam” again.
Steam-ironing
• As indicated on the temperature control (A) and the table, steam-
ironing is only possible at higher ironing temperatures:
2
or
3
for moderate steam
3 for maximum steam.
• With conventional steam irons, water may leak from the soleplate if a
too low temperature has been selected. This will then cause stains.
Your new steam iron (types HI 282, HI 284, HI 292 and HI 294 only)
has the "Drip Stop" feature. If a too low temperature has been