- 11 -
2.3
Software upgrade
For the best guest experience, it is highly recommended to use the latest software version available.
Go to: http://www.philips.com/support/
Select your country, enter the model number and download the latest software version
available
Unzip the software and follow the instructions how to upgrade the software on the TV
The USB flash drive used for software upgrade must be formatted as FAT32 and preferably
empty to avoid an accidental upload of a wrong setting or software
Preparation:
o
Copy the software (Autorun.upg) on the root of the USB stick (FAT32 formatted) and
do not change the name
Procedure:
o
Start up the TV and wait until it is fully booted up, should take a max of 1min
o
Insert the USB stick
o
A wizard will automatically appear and start the upgrade to the new SW
o
Wait until the process finishes and do not unplug the power cord
o
After around 2min the update will be done and the USB stick can be extracted
It’s required to first upgrade the TV and afterwards to perform the installation
The latest software version and cloning data can be stored on the same USB drive for a 2 in 1 action:
software upgrade and cloning during the instant initial cloning. See chapter ‘Instant Initial Cloning (IIC)’
for more information.
