38
Philips · HDP16x0 & HDP16x0TV
12 Service
Cleaning
Cleaning the Lens
Use a brush or lens cleaning paper for cleaning the lens
of the projector.
Device Overheated
A overheat symbol appears if the device is overheated.
Update Firmware with
Memory Card
1
Use SD memory card in the file system FAT16 or
FAT32.
2
Save the latest firmware update file to the root of
the memory card.
3
Insert the memory card (see Inserting a Memory
Card, page 21) and switch the device on.
4
Use the navigation keys to select
Settings
.
5
Confirm with
à
.
6
Use
/
to select
Maintenance
.
7
Confirm with
à
.
8
Use
/
to select
Firmware Update
.
9
Confirm with
à
.
10
Use
/
to select
Install
.
11
Confirm with
à
.
12
The device turns off and on again. After around 5
minutes the
Language Selection
screen appears.
The firmware update is now completed.
DANGER!
Instructions for Cleaning!
Use a soft, lint-free cloth. Never use liquid or
easily flammable cleansers (sprays, abrasives,
polishes, alcohol, etc.). Do not allow any
moisture to reach the interior of the device.
Do not spray the device with any cleaning flu-
ids.
Wipe over the surfaces gently. Be careful that
you do not scratch the surfaces.
DANGER!
Do not use any Liquid Cleaning Agents
Do not use any liquid cleaning agents for
cleaning the lens, to avoid damaging the coat-
ing film on the lens.
DANGER!
All Data will be Deleted!
This procedure erases all your data that is
stored on the memory card.
DANGER!
Inserting a Memory Card!
Never pull out the memory card while the
device is accessing it. This could cause data
to be damaged or lost.
Notice
If an error occurs during the firmware update
process retry the procedure or contact your
dealer.
Screeneo_User-Manual_HDP16x0_V1-1_EN-US_253634032-A.book Page 38 Jeudi, 12. février 2015 11:31 11
