Philips HB600, Руководство пользователя

Страница: 105 / 152

ENGLISH
105
Tanning
1 Put on the protective goggles provided.
2 Switch the tanning lamps on by pressing the green I button.
◗
The display shows the remaining tanning time.
◗
During the tanning session, the dot next to the time indication blinks.
◗
If you want to switch the appliance off during the tanning session, press the red O button.
B
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed). Symbol
– and the remaining cooling time (180-0 seconds) are shown on the display.
◗
You can adjust the intensity of the facial tanner during the tanning session. Use the ¡ and ™ buttons to select ª and then set the
required intensity.The new setting becomes active immediately.
B
If you have not set the fan power within approx. 5 seconds, the remaining tanning time will be shown on the display again.
B
If you want to set the facial tanner from O (off position) to 1 or 2 while the lamps have not yet cooled down sufficiently, the O symbol will blink on
the display.
◗
You can adjust the fan power of the body cooler during the tanning session. Use the
¡
and
™
buttons to select
≠
and then set the
required power.The new setting becomes active immediately.
B If you have not set the fan power within approx. 5 seconds, the remaining tanning time will be shown on the display again.
◗
During the last 5 seconds of the tanning session,you will hear a beeping sound and the appliance will switch off automatically after these
5 seconds.
A few seconds after the appliance has been switched off, the cooling fans go on automatically to cool down the appliance for 3 minutes (if the
standard setting has not been changed). Symbol
– and the remaining cooling time (180-0 seconds) are shown on the display.