6
7
6
Filter replacement and reset
Philips GoPure car air
purification system is
a multi-layer filtration
system that guarantees
the most effective
air-purification. All filter
layers are integrated in
one simple-to-replace
filter.
6.1
Filter replacement
reminder
1.
Philips GoPure car
air purifier reminds you
automatically when filter
need to be replaced.
2. Remove the old filter
as shown.
m
Important
You must reset the
Philips GoPure device
after every filter
replacement.
1. Open top cover, press
& hold the cigarette
lighter’s control button
for 5s until “ding ding”
sound. The filter reset is
completed.
2. Car air purifier operates
in normal mode once
top cover is locked.
3. Repeat the above steps
if the filter reset fails.
m
Important
For you safety, GoPure
car air purifier will shut
down automatically
whenever you open
the top cover.
3.
Insert new original
GoPure filter. According
to the directions shown
above.
m
Important
The filter slides in only
one way, do not force
it in.
6.2
How to replace
filter and reset GoPure
car air purifier.
1. Push OPEN button,
take off top cover.
2. When the filter
need to be replaced,
the cigarette lighter
will display “FLt” and
device's AQI will alert in
yellow blinking light.
3. You can also enable
APP notification for
filter status monitoring.
m
Important
Replace the filter
immediately using only
genuine Philips GoPure
SelectFilter Plus. With
the right filter, the
GoPure car air purifier
will continue to perform
optimally and provide
the purest air quality
inside your car.
